StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

The Finite Element Method - Math Problem Example

Summary
The paper "The Finite Element Method" tells us about numerical procedure used for finding approximate solutions of partial differential equations (PDE). Problems which use this method are usually too complicated to be solved by classical analytical methods and require significant computational solving capabilities…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER91% of users find it useful
The Finite Element Method
Read Text Preview

Extract of sample "The Finite Element Method"

1.0 The Finite Element Method―Background The finite element method (FEM) is a numerical procedure used for finding approximate solutions of partial differential equations (PDE). Problems which use this method are usually too complicated to be solved by classical analytical methods and require significant computational solving capabilities. The solution approach is based either on eliminating the differential equation completely (steady state problems), or translating the partial differential equations into equivalent ordinary differential equations, which are then solved using standard techniques such as finite differences. One of the main challenges in solving partial differential equations is to use equations which are approximate but numerically stable so that error accumulation does not cause the solution to be meaningless. The finite element method is an excellent technique for solving partial differential equations over complex domains. Application of the finite element method in structural mechanics is based on an energy principle, such as the virtual work principle, which provides a general, intuitive and physical basis. The finite element method originated as a technique used to solve stress analysis problems, but today it can be applied to a multitude of disciplines ranging from fluid mechanics, to heat transfer to electromagnetism. 2.0 Problem Statement The buckle of a standard lap belt used in passenger aircrafts has been designed and is ready to undergo testing. In order to be released into the market, the strap system must be able to withstand a 450 kg tensile load. It is assumed that the weakest point of the design is the flat plate of the buckle. Thus, prior to engaging in a costly test scenario, a simple finite element analysis of the buckle is to be made to insure soundness of design, i.e. the material does not exceed its yield strength and no significant distortion occurs. Preparing the problem for analysis first requires definition of assumptions. 2.1 Part Geometry Figure 1 is a schematic drawing of the buckle to be analysed. The part has been symmetrically divided for simplification. It is assumed that the finite element model that is generated adequately represents the geometry of the part. The thickness of the part (which is assumed to be constant) is believed to be small enough compared to the width of the part such that shell elements can be used. Displacements are expected to be relatively small such that a linear approximation will be valid. Figure 1 2.2 Material Properties The part is manufactured from 2.5 mm stainless steel plate with a Youngs modulus of elasticity of 206 GN/m2, Poisons ratio of 0.3, and a yield strength of 580 MN/m2. Homogeneous and isotropic material was assumed with no discontinuities or residual stresses present as a result of manufacturing processes such as forging, rolling and welding. The material is assumed to have linear elastic properties. 2.3 Mesh A mesh that provides a good representation of the model is critical for an accurate solution; the elements must be well-shaped and close fit. For this analysis, the element type chosen was PLANE82, which is a 2D structural solid element. The element has 8 nodes, which increases calculation time over its 4-node counterpart but also increase accuracy of solution. Eight-noded elements are also known to be more accurate for modelling curved boundaries, which is where the areas of maximum stress were expected in the buckle. The PLANE 82 element type also offered the benefit of accounting for a thickness value in its input properties. Since maximum stress values were expected in the curved sections of the part, two meshing values were utilised, thus providing a denser mesh in critical areas. In the curved areas, a value of 0.25 was used, while 0.51 was used in the rest of the model. 2.4 Boundary Conditions Determination and application of boundary conditions is critical to the analysis. For this model, it was assumed that displacements would be small enough so as to not affect loading, friction losses would be negligible, and interfaces are considered to be rigid and unaffected by displacement. The tensile load is 450 kg applied uniformly across well-defined areas. The part is constrained to resist rotation. In Figure 2, the centre of mass can be seen placed at a location 37.5 mm from the short edge or 32.5 from the long edge. Figure 2 The force applied to the model must be determined. This is calculated by distributing the load across an area where it would be applied in an actual situation. Thus, the force is the tensile load multiplied by acceleration we have: Force = 450 kg X 9.81m/s2 = 4414.5 N Since the two slots in the parts have different areas, the load distribution will be different (see Figure 3 for definition of parts A and B). On part A, area can be calculated as: Total Area Part A= 42 mm X 2.5 mm= 105 mm2 Then the load on part A can be determined as: Pressure load = Force / Total Area = 4414.5 /105 = 42.042 N/mm2 Similarly for part B: Force = 450 kg X 9.81m/s2 = 4414.5 N Total Area Part B= 40 mm X 2.5 mm= 100 mm2 Pressure load = Force / Total Area = 4414.5 /100 = 44.145 N/mm2 Figure 3 Part A Part B 3.0 Analysis The ANSYS interface of Figure 4 is a snapshot of the Main Menu and Status bar to provide an overview of how data is placed into the software. Figure 4 Once the model is meshed, and the material properties and boundary conditions are placed, the solution phase can be run. Figure 5 depicts the meshed model with applied loads. Figure 5 4.0 Results The solution depicting Von Mises stresses across the entire model are shown in Figure 6. As was expected, the maximum stresses occurred in the curved regions. Figure 7 displays the results of part A and shows that the maximum stress in the buckle was around the curve in and reached a value of 661.058 N/mm2 which exceeds the yield strength (580 MN/m2) of the stainless steel material used for the buckle. Figure 8 depicts the results of the finite element analysis for part B, which essentially mimic the results of part A. Figure 6 Figure 7 Figure 8 A maximum displacement of nearly 8 mm occurring due to the applied force can be seen in Figure 9. This value can also be directly used to calculate the strain in the material, and with the elastic modulus and generalized Hookes Law, it should confirm the FEA prediction. Figure 9 5.0 Conclusions and Recommendation The finite element analysis predicted that a 450 kg force applied across the modelled buckle would cause the material to attain concentrated stresses of 661 N/mm2. This stress level would exceed the 580 N/mm2 yield strength of the material; and thus, according to the problem statement, the component would not be deemed suitable for sale. The significant distortion is also an indication that the design is not sound. Although the method of finite element analysis is an approximate numerical estimate and exact results can only be determined through applied tests, the calculated stresses are 14% higher than the yield strength, which is not an insignificant amount. Thus, my recommendation is that redesign should occur followed by another finite element analysis prior to testing. References Cook, R. D., Malkus, D. S. & Plesha, M. E. (1989). Concepts and applications of finite element analysis. New York: John Wiley & Sons. Craig, R. R. Jr., (1996). Mechanics of materials (1st ed.). New York: Wiley. Fagan, M. J. (1992) Finite element analysis theory and practice. Singapore: Longman Singapore Publishers (Pte) Ltd. Taylor, R L., & Zienkiewicz, O. C. (2000). The finite element method (5th ed.) volume1: The basis. Oxford: Butterworth Heinemann. efunda (2007) Material properties stainless steel AISI type 302. Retrieved from: http://www.efunda.com/materials/alloys/stainless_steels/show_stainless.cf m?ID=A ISI_Type_302&prop=all&Page_Title=AISI%20Type%20302. Read More

CHECK THESE SAMPLES OF The Finite Element Method

The Finite Element Analysis

The paper 'The Finite Element Analysis' focuses on The Finite Element Method (FEM), which is a mathematical procedure for judging estimated results to partial differential equations (PDE) and their mechanisms, which may be used for integral equations.... The solution method is founded on removing the spatial derivatives.... The solution method is founded on removing the spatial derivatives from the partial differential equations.... A boundary condition is a method that which a defined node in a FEM model is fixed to the zero state and several additional nodes in the model....
5 Pages (1250 words) Assignment

The Finite Element

The Finite Element Method (FEM) is a numerical procedure used for finding approximate solutions of partial differential equations (PDE).... The Finite Element Method is an excellent technique for solving partial differential equations over complex domains.... Application of The Finite Element Method in structural mechanics is based on an energy principle, such as the virtual work principle, which provides a general, intuitive and physical basis....
14 Pages (3500 words) Research Paper

Finite Element Analysis

The Finite Element Method is applicable on solids; liquids, plasma and gaseous substances, and problems related to soil mechanics, electromagnetism and dynamics can be traced through this technique.... The nodes are considered to the points at the boundaries of the finite element mesh.... The scientists and engineers have been able to find solution of several physical and non-physical problems through finite element.... he mesh is the marking of regions on the surface area, and therefore in the case of continuous regions no gaps are evident during finite element mesh....
5 Pages (1250 words) Essay

Concrete Dams as a Structures

They can cause catastrophic failures thus the design of gravity dams using finite element analysis and seismic analysis has become critical.... The author of the paper "Concrete Dams as Structures" argues in a well-organized manner that there are several types of concrete dams, which are grouped according to how they transfer hydrostatic pressure....
7 Pages (1750 words) Coursework

Finite Difference Method and MATLAB

Finite Element Method and MATLABThe following equation for steady turbulent flow can be solved using The Finite Element Method and MATLAB.... ue to the dynamic nature of The Finite Element Method is able to find very many applications.... It is common to use The Finite Element Method while river modeling.... The ability of The Finite Element Method to identify periodically repetitive components makes it a favorable method for this purpose....
6 Pages (1500 words) Assignment

Computer Aided Design Software

From the paper "Computer Aided Design Software " it is clear that the FEA method has several advantages compared with manual methods.... First, the FEA method has more extensive applications than manual methods.... For instance, it applies to all problems in solid mechanics....
6 Pages (1500 words) Assignment

Finite Elements Applications

In conclusion, this report postulates that The Finite Element Method (FEM) and its applications have made engineers have better solutions in addressing challenges in their different roles.... The Finite Element Method is a numerical process that allows engineers in different areas to find estimate solutions to partial differential equations in boundary value problems.... Effectively, The Finite Element Method is used in different areas and applications....
6 Pages (1500 words) Literature review

Finite Element Analysis Program

The Finite Element Method applies these standard methods of matrix algebra to solve equations derived from a set of finite elements that make a model.... The Finite Element Method is used to solve such a problem in three major phases: pre-processing phase, analysis phase, and post-processing phase (Rao, 2011, p.... The essay "Finite Element Analysis Program" focuses on the critical, thorough, and multifaceted analysis of the peculiarities of the finite element analysis (FEA) program, a method that is designed to obtain approximate solutions to complex engineering problems....
5 Pages (1250 words) Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us