StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Nobody downloaded yet

Soil Elastic Modulus Measurement Using Triaxial Test - Research Proposal Example

Cite this document
Summary
"Soil Elastic Modulus Measurement Using Triaxial Test" paper examines this soil parameter measuring the stiffness of the soil. It is defined as the ratio of stress along an axis over the strain in that along that axis provided it is within the range of elastic soil behavior…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER94.1% of users find it useful
Soil Elastic Modulus Measurement Using Triaxial Test
Read Text Preview

Extract of sample "Soil Elastic Modulus Measurement Using Triaxial Test"

Download file to see previous pages

The basic concept applied in performing the triaxial shear test is that when stress is implemented in the vertical direction along the axis of a cylindrical sample the resulting stress is different from stresses applied in the horizontal direction perpendicular to the sides of the cylindrical sample (BISHOP and HENKEL, 1962, p.12).When performing the triaxial test on homogeneous and isotropic materials, it results in a non-hydrostatic stress state, with the shear stress on certain occasions leading to the failure of the sample in shear.

Inhomogeneous and anisotropic materials, the resulting shear stress may lead to failure due to the bending moments. There are various types of triaxial tests. They include Consolidated Drained (CD), consolidated undrained (CU), and unconsolidated undrained (UU).In CD, the sample is consolidated and shared while the compression results in drainage. In CU, the given sample is not allowed to drain and is compressed at a constant rate. In UU, the sample is not permitted to flow and is compressed at a constant rate (BISHOP and HENKEL, 1962, p.25).To perform the triaxial test on soil, a cylindrical soil sample is used.

The soil sample is confined to a rigid bottom and top plate that is covered by a rubber membrane. A vertical load is then placed on top of the sample. The horizontal pressure is then applied on the sides using water (Hydrostatic pressure). The rubber membrane is used to prevent water from penetrating. Throughout the experiment, the water pressure is constant. By increasing vertical pressure at a constant velocity, the soil sample gradually compresses until shearing occurs. From the triaxial test, the following shear strength parameters are derived.

They include the cohesion, angle of internal friction, and dilatancy angle. Rigid parameters such as the Young modulus of elasticity can also be determined (DONAGHE, CHANEY, and SILVER, 1988, p.6).

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Soil Elastic Modulus Measurement Using Triaxial Test Research Proposal Example | Topics and Well Written Essays - 6000 words, n.d.)
Soil Elastic Modulus Measurement Using Triaxial Test Research Proposal Example | Topics and Well Written Essays - 6000 words. https://studentshare.org/engineering-and-construction/1877350-soil-elastic-modulus-measurement-using-triaxial-test-proposal
(Soil Elastic Modulus Measurement Using Triaxial Test Research Proposal Example | Topics and Well Written Essays - 6000 Words)
Soil Elastic Modulus Measurement Using Triaxial Test Research Proposal Example | Topics and Well Written Essays - 6000 Words. https://studentshare.org/engineering-and-construction/1877350-soil-elastic-modulus-measurement-using-triaxial-test-proposal.
“Soil Elastic Modulus Measurement Using Triaxial Test Research Proposal Example | Topics and Well Written Essays - 6000 Words”. https://studentshare.org/engineering-and-construction/1877350-soil-elastic-modulus-measurement-using-triaxial-test-proposal.
  • Cited: 0 times

CHECK THESE SAMPLES OF Soil Elastic Modulus Measurement Using Triaxial Test

Determination of the liquid limit, plastic limit and plasticity index of a cohesive soil

Results Sample description: 50% Clay / 50% Sand test location: Group: C Date: 2/03/11 Liquid Limits test No.... Results Sample 50% Clay 50% Sand test location: Group: C 2/03/11 Liquid Limits test No.... Data plot was taken from the results of the liquid limit test, where the x-coordinates or abscissas are the calculated moisture contents and the y-coordinates or ordinates are the penetration.... Penetration Plastic Limits test No....
2 Pages (500 words) Lab Report

Price-Elastic Products

Price elastic products are those whose rise in price will cause a remarkable decrease in demand.... A product becomes price elastic when there is a severe competitive market.... Having price elastic good doesn't mean you are unprofitable (e.... Running head: PRICE-elastic PRODUCTS PRICE-elastic PRODUCTS INTRODUCTION Price elastic products are those whose rise in price willcause a remarkable decrease in demand....
1 Pages (250 words) Essay

A Three-dimensional Constitutive Model for the Large Stretch Behavior of Rubber Elastic Materials

The eight chain model precisely exemplifies the supportive nature of system distortion at the same time calling for only two material constraints, an original modulus, and restrictive chain extensibility.... The essay "A Three-dimensional Constitutive Model for the Large Stretch Behavior of Rubber elastic Materials" states that According to the document, a constitutive model is recommended for the distortion of materials that are made of rubber that is seen to characterize successfully the reaction....
1 Pages (250 words) Essay

Triaxial undrained test

A triaxial shear test is commonly used in order to measure the mechanical properties of many deformable solids such as soil, rock or any other granular materials and powders.... A number of different methods are available to carry out this test (Bardet, 1997). The results obtained… This calculated stress was corrected by removing the cell pressure because cell pressure tends to act uniformly in addition to the actual stress of interest (see Figure 1)....
5 Pages (1250 words) Essay

Writing Procedure for soil compaction

The test is repeated preparing the 3 lifts in a similar manner and collection the sample soil in the tin cup.... Once the second test is complete, three more tests are performed then the sample allowed to dry up for a period of 24 hours by placing it in an oven.... As such, the compaction mold with the base plate is measured is weighed using the weighing balance and the measurement recorded (Fang 268).... Then, using the compaction hammer, the first layer known as a lift, is formed by releasing the hammer at a height of 12 inches above the soil and allowing it to transfer all of it's energy into the soil, resulting in the compaction of the soil....
2 Pages (500 words) Lab Report

Testing Property of Soil of a Site

Tests such as Moisture Probe test, the Mackintosh test, shear vane test and the permeability test were conducted to establish the properties of various strata.... The results of these tests revealed that; This test is aimed at measuring the ability of the soil to sustain structural load.... This test is essence for the purpose of putting up a building in the site.... The test first measure the un-drained shear strength by planting a shear vane into the ground and measures the level of pressure at the point where the soil shears as shown on table 3....
3 Pages (750 words) Essay

Introduction for lab report Iron in Soil and Coal

The sample is placed in a hydrochloric acid solution followed by a measurement of Spectrophotometer using silver diethyldithiocarbamate which is the reagent that forms colour.... Various analytical methods are available for arsenic measurement in various environmental samples.... Some of them include the soil texture,… Iron in the soil is a significant property that enhances healthy plant growth.... The iron in the soil appears in form of precipitate after the absorption of the leached components in situ....
1 Pages (250 words) Essay

Soil mechanics

Design of holes in between the retaining is very important to allow for reduction in the water held in the nearby soil.... These variables include water pressure, intense earthquake and intensive weight from water- logging.... The stated condition would create abnormal loads on the wall and thus results in… Water-logging would effectively lead in to swelling of the surrounding soils and thus push the block down....
5 Pages (1250 words) Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us