StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Fire Solution: External Fire Spread between Buildings - Assignment Example

Cite this document
Summary
The author of the paper "Fire Solution: External Fire Spread between Buildings" states that the control and protection of external fire spread between buildings can be assessed by looking at three major aspects, namely;- External walls; Roof covering; Space separation…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER91% of users find it useful

Extract of sample "Fire Solution: External Fire Spread between Buildings"

Student Name: xxxx Tutor: xxxx Title: Fire Solution Date: xxxx ©2016 Part A: External Fire Spread between Buildings The control and protection of external fire spread between buildings can be assessed by looking at three major aspects, namely;- i. External walls ii. Roof covering iii. Space separation External Walls The Building Regulation (Approved Document B) dictates that external walls to a building shall be constructed in a manner so as to adequately resist the spread of fire over and/ or through the walls from one building to another, making due consideration for the height, use and position of the building [The10]. This requirement is only said to be met if the external walls are constructed so that the risk of ignition from an external source, or the spread of fire over their surface is restricted by having provisions which limit their rates of heat release. However, the construction of the external walls may provide adequate protection from external fire spread only to be compromised by the presence of unlimited unprotected areas along their surfaces, such as windows. The Building Regulation states that there should be adequate restriction on the amount of unprotected area on the side of the building, in an effort to limit the quantity of thermal radiation passing through the external wall, with due consideration to the free distance between the wall and the boundary. The combustibility of external walls should be restricted in order to reduce the susceptibility of the surface to ignition and reduce the danger from fire spread up the external surface of the building. These provisions are made for external load bearing walls to maintain their load bearing functionality even in the occurrence of a fire outbreak. These provisions are mandatory for all walls less than from the relevant boundary, and all external walls of high buildings and those used for assembly or recreation, irrespective of the distance to the relevant boundary. Cavities and filler elements in high buildings, such as gaskets and sealants, used in external wall construction should have provisions that restrict their combustibility, so as not to compromise the structural integrity and fire spread resistance of the wall. Roof Covering The Building Standards dictate that the roof of the building shall adequately resist the spread of fire over the roof and from one building to another, having due regard to the use and position of the building. Therefore, the mode of construction of the roof should limit the risk associated with fire spread by providing adequate protection from fire spread and/ or ingress of fire from an external source. The space separation between rooflights in any direction is determined to be a minimum of 3m. Additional distance is required () when plastic rooflights are used. The requirements of roofs are limited as buildings do not border each other with roofs. However, it should be noted that, if the roof is erected with a pitch greater than 700, it is considered an external wall and the requirements dictated for external walls apply in this scenario. Space Separation Modern architecture leans towards buildings with larger windows for aesthetic value. As a result, the risk of external fire spread is increased due to the large sections of unprotected areas. To maintain such constructions and prevent fire spread, space separation has become a very integral part of the design and location of modern buildings [Fir91]. The provisions for space separation detailed in the Building Regulations are based on assumptions that allow a reasonable standard to be specified. Due to the lack of boundaries between roofs, these provisions do not apply, except in the case where the roof is erected at a pitch is greater than 700. These assumptions are;-[The10] a. The compartmentation of the building will determine the size of the fire, so that the fire may engulf an entire compartment but not spread to other compartments b. The use/ purpose of the building, and hence the components stored therein will determine the intensity of the fire. Nonetheless, the intensity of the fire can be reduced/ moderated by the installation of a sprinkler system c. There is a greater risk to life in buildings used for residential, assembly and recreational purposes than other uses d. The elevation and distance from the common boundary of the adjacent building are identical to those of the building in question e. The amount of radiation passing through any part of the external wall installed with adequate fire protection may be discounted The use of distance to a boundary in the measurement of separation distance, as opposed to the actual distance between the buildings, allows for the calculation of allowable proportion of unprotected areas regardless of the properties of the building on the adjoining site. When the adjoining site’s land use makes it unlikely that there will be additional development, such as a road or railway, part of the adjoining space may be regarded as being within the relevant boundary. If the angle between a wall and a boundary is 800 or less, the wall is taken as facing the boundary. In the case where two buildings are within the same site and are used for residential, assembly or recreational purposes or are managed by different authorities, a notional boundary is introduced. The location of this boundary is determined by the provisions of one building to adhere to the requirements of space separation. The location of the second building will be determined using the notional boundary as its relevant boundary to determine the distance to conform to space separation requirements. The distance between the building and the relevant boundary is determined by the fire load intensity of the building, as well as the compartmentation under consideration (is it ‘normal’ or ‘low’) [Fir91]. It is very rare for actual flame contact or flying brands to ignite a building on an adjacent site that is cold. However, the possibility of ignition of a secondary fire becomes a real danger should the building be heated by radiation from the primary fire, due to the heat of radiation bringing the building close to its ignition point. Therefore, it is important to determine the level of radiation being produced by a burning building and the amount of radiation necessary to ignite the exposed surfaces of the building on the adjacent site. Fire spread by radiation from building to building is dependent on;- [BSI08] a. The distance between the building of origin and the neighbouring structure and their orientation (configuration factor) b. The extent of building surface capable of transmitting heat to the neighbouring building. Heat transfer is ignored for structures whose external walls have sufficient fire protection c. The intensity of the source radiation Unprotected areas on the surface of external areas may be regarded as negligible when considering space separation if;- 1. The area is less than or has two or more small unprotected areas () within a area and is separated from another such area by at least 4m 2. The distance between small unprotected areas is more than 1.5m Several experiments were carried out by the Fire Safety Team of the Building Research Establishment (BRE Global) concluded that the spread of fire between buildings was facilitated by various factors, such as narrow streets, combustible building materials, hazardous activities involving combustible materials and the poor enforcement of regulations [Chi15] Methods of Determining Boundary Distance 1. Enclosing Rectangles (Geometric Method) In this method, the elevation is viewed and a rectangle drawn around the unprotected areas, and the minimum boundary distance for this size of rectangle determined from a table. The process is repeated for all elevations to obtain a trace in plan. If the relevant boundary falls outside the trace, no action is required; otherwise, further analysis of the problem is necessary to determine possible solutions. This method is used for external enclosures in a single plane without significant recesses or setbacks 2. Notional Areas (Protractor Method) In this method, the building is viewed from a series of points on the boundary and the effective areas of the visible ‘unprotected areas’ calculated. The further an unprotected area is from the boundary, the smaller the effective area. The distance factors used in calculation of the area are obtained by placing a ‘protractor’ made to the same scale as the plan and noticing which zones the unprotected areas fall. The sum of all the effective areas of ‘unprotected areas’ should not exceed a prescribed limit. This method is employed for buildings that have complex plan shapes. 3. Small Residential Buildings [BSI08] Table 37 is used to determine the appropriate boundary separation distance when the building is intended for residential use only. The building should be less than 3 storeys high and less than 24 m in length 4. Fire Engineering Calculation This method is described in BS 7974 [BSI01] Part B: Determination of Unprotected Areas Methods of Enclosing Triangles This method is chosen as the two buildings in question have an external enclosure (nominal) in a single plane, without any significant setbacks or recesses. Assumptions 1. The Maudland Building is classified under Residential, Assembly or Recreational buildings, being relatively fully occupied during most times of the day 2. The Maudland Building’s external walls are constructed with provisions to prevent fire spread 3. The Maudland Building’s walls do not have any combustible material more than 1mm thick on their external surfaces (unprotected percentage Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Fire Solution Example | Topics and Well Written Essays - 2729 words, n.d.)
Fire Solution Example | Topics and Well Written Essays - 2729 words. https://studentshare.org/engineering-and-construction/2055126-fire-solution
(Fire Solution Example | Topics and Well Written Essays - 2729 Words)
Fire Solution Example | Topics and Well Written Essays - 2729 Words. https://studentshare.org/engineering-and-construction/2055126-fire-solution.
“Fire Solution Example | Topics and Well Written Essays - 2729 Words”. https://studentshare.org/engineering-and-construction/2055126-fire-solution.
  • Cited: 0 times

CHECK THESE SAMPLES OF Fire Solution: External Fire Spread between Buildings

Analysis of Building Fires

ire-resistant materials should have been used to ensure that the speed of the fire spread is reduced or controlled.... he fire started at the ground level where expansion plates were ignited by a welder, and these plates were covered with polystyrene insulation that was covering the voids below the second floor (between the ground level and the second level).... Smoke and flames then spread upwards into the second level through the openings that were on the stairwells and unprotected escalator openings....
9 Pages (2250 words) Case Study

Fire Precaution for the Upcoming Lecture Theatre

In a bid to mitigate fire spread, the facilities shall be set in a manner that adheres to the provisions of this section.... This assignment "fire Precaution for the Upcoming Lecture Theatre" gives a fire protection plan and the underlying procedures which will be followed in ensuring that the building under renovation construction.... The building, the current fire laboratory is being converted to a lecture theater.... All the fire fighting appliances shall be set inaccessible areas such that rescuers can have an easy time-saving lives....
9 Pages (2250 words) Assignment

The Function and Purpose of the UK Building Regulations

Fire strategies commonly consider the stability of buildings in case of fire, means to warn occupants of fire such as alarm, means to prevent fire spread such as fire resistance internal linings ad doors, sprinkler systems, prevent fire from spreading into a neighboring building, and adequate facilities for fire appliances during a response (Approved Document B1, 2006, p.... ire strategies are generally to minimize fire occurrence and spread and provide people with appropriate means of escape in case of fire....
14 Pages (3500 words) Assignment

External Cladding in High Rise Buildings in the Gulf Countries

The paper "External Cladding in High Rise buildings in the Gulf Countries" states that the use of combustible materials for external cladding should be avoided as flames coming out of windows may travel through the burning external cladding and spread in the upper floors.... In terms of fire fighting, firefighters may find it difficult to fight fires in high-rise buildings as standard fire fighting equipment can only reach up to seven stories.... Most high-rise buildings only have two exit stairways that can lengthen evacuation time by around two hours in a fifty-story building....
9 Pages (2250 words) Report

Smoke Movement in High Rise Building

The smoke that is caused by a fire in high-rise buildings is a potential threat to life and it has resulted in many fatalities in the world.... Due to the modern construction techniques of high rise buildings, measures have been put in place to prevent the spread of fires from one floor to the other.... The smoke usually penetrates the spaces that are found in the buildings.... In most instances, the high rise buildings usually have elevators and other open spaces like the fire exit and stairs....
17 Pages (4250 words) Report

Engineering Design Practice: Fire Resistance Testing

The fire profile shall affect the fire spread due to oxygen supply at the early stage of fire development thus modifications should only be made under the advice of design experts (Shaw, 2010).... The reaction by a material to fire involves the measurement of how a material or system as a whole will contribute to the development and spread of fire especially during the early stages.... "Engineering Design Practice: fire Resistance Testing" paper identifies the reaction to fire testing, discusses the term 'flammability limits', the effects of temperature on flammability limits, heat release rate in relation to fire hazards and the factors which will influence the fire development....
11 Pages (2750 words) Assignment

External Wall Fire Spread

The risk of fire spread between adjacent buildings may not be eradicated completely, but the objective of calculating adequate separation distance between buildings is to make sure that the fire ignition in one building is delayed from spreading to the adjacent building to allow fire service to arrive and prevent the fire spread (Muckett and Furness, 2007).... "External Wall Fire Spread" paper describes requirements of external fire spread and space separation, areas where space separation needs to be considered, methods of assessing space separation and allowable unprotected areas, and calculations on how allowable unprotected areas are determined....
10 Pages (2500 words) Coursework

Fire Safety Engineering

This work called "Fire Safety Engineering" describes an engineering discipline involving mechanical, chemical, civil, and electrical concepts in studying the fire effects and phenomenon through the study of human behavior, proper design, and arrangement of spaces in buildings to mitigate fire, save lives and property.... Fire services engineering refers to the design of features that are used in fire suppression while fire safety engineering refers to the application of engineering principles in the control of fires in buildings....
14 Pages (3500 words) Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us